GSS HDTV 1000 T, Assembly Instructions Manual

Page: 11 / 48

- 11 - HDTV 1000 T / HDTV 1001 T
3 Assembly
3.1 Installing the cassette
– Ensure the head-end station is mounted so it will not be able to vibrate.
ۜˆ`]ÊvœÀÊiÝ>“«i]ʓœÕ˜Ìˆ˜}ÊÌ iÊ i>`‡i˜`ÊÃÌ>̈œ˜Êœ˜ÌœÊ>ʏˆvÌÊà >vÌʜÀÊ>˜ÞÊ
other wall or floor construction that vibrates in a similar way.
– Before installing or changing a cassette unplug the power cable from the
mains power socket.
Ê UÊ ,i“œÛiÊÌ iÊv>ÃÌi˜ˆ˜}ÊÃVÀiÜÃÊ
1
of an unoccupied slot from the bracket of
the head-end station.
Ê UÊ ˜ÃiÀÌÊÌ iÊV>ÃÃiÌÌiʈ˜ÊÌ ˆÃÊϜÌÊ>˜`Ê«Õà ʈÌʈ˜ÌœÊÌ iÊ œÕȘ}°
Ê UÊ ˆ}˜ÊÌ iÊV>ÃÃiÌÌiÊ>˜`Ê>««ÞÊψ} ÌÊ«ÀiÃÃÕÀiÊ̜ÊVœ˜˜iVÌʈÌÊ̜ÊÌ iÊVœ˜˜iV̈œ˜ÃÊ
of the board and the HF bus bar.
Ê UÊ >ÃÌi˜ÊÌ iÊV>ÃÃiÌÌiÊÜˆÌ ÊÌ iÊÃVÀiÜÃÊ
1
.
0°
KASSETTE KASSETTE KASSETTE KASSETTE KASSETTE KASSETTE KASSETTE KASSETTE KASSETTE KASSETTE KASSETTE KASSETTE HYBRID-­VERSTÄRKER
MESSAUSGANG
–20 dBµV
AUSGANG
max. 106 dBµV
ACHTUNG!
Vor dem Kassettenwechsel
unbedingt
denNetzstecker ziehen.
CAUTION!
Before changing cassettes remove
mains plug.
Grundig SAT S y st e ms
3.2 EMC regulations
To comply with the current EMC regulations, it is necessary to connect the lines
leading in and out of the head-end station using cable terminals.
When mounting the cassette in a STR 19-8 or PST 19-1 head-end station which
is installed in a 19” cabinet, make sure the connections leading in and out for
the 19” cabinet are made using cable terminals.
CLASS
KLASSE
The attenuation of shielding of the connection lines for ASI and antenna must
meet the requirements for “Class A”.