manualshive.com logo in svg

GSS HDTV 1000 MPTS, Assembly Instructions Manual, Page: 20 / 46

Share
Download
GSS HDTV 1000 MPTS Assembly Instructions Manual Download Page 20

- 20 -

- 20 -

• Press the 

 button.

—>  The “Setting the Ethernet parameters” – “

ETHERNET

” 

menu is activated.

Setting the Ethernet parameters

In this menu you specify whether the Ethernet parameters for 
the prospectively intended control of the cassette are entered 
automatically by a connected server (“

DHCP

”), or whether 

you want to enter them manually (“

stat

”). To assign the cas-

sette uniquely, each IPTV cassette must be allocated its own 
IP address.

• Press the 

 buttons to select manual setting (”

stat

”) or 

automatic setting (”

DHCP

”) of the Ethernet parameters.

• Press the 

▶

 

 button to activate the setting options (”

Options

”).

—>  The “Setting the IP address of the cassette” – menu
 

“

IP-ADDR

” is activated.

Setting the IP address of the cassette

If you choose to enter the Ethernet parameters manually, 
set the IP address of the cassette in this menu. If “

DHCP

” 

is selected, the “

IP-ADDR

”, “

IP-MASK

” and “

IP-GATEWAY

” 

sub-menus display the parameters that were assigned auto-
matically by a connected server. If a server is not connected, 
“  0.  0.  0.  0*” appears in the corresponding menu. 
The star “ * ” in the display means that the data is provided 
by a DHCP server.

Bx 4

stat => 

ETHERNET

Options

stat / DHCP

Bx 4

192.168.   0.128

IP-ADDR

Å

 

Ï

/

Å

 

Bx 4

192.168.   0.128

IP-ADDR

Å

Ï

/

Summary of Contents for HDTV 1000 MPTS















































Reviews:

No comments