5.2 Programming the cassette
—> Pressing the
button for longer than 2 seconds cancels the pro-
gramming procedure. This takes you back to the program item “Selecting
the cassette” from any menu. Any entries that have not been saved are
reset to the previous settings.
—> Entries in the menus can be saved by pressing the
M
key. You are taken
back to the “Selecting the cassette” menu item.
—> Using the
AUDIO
button previous menus can be activated.
• Switch on the head-end station
—> The display shows the software version (e.g. V 40)
—> The processor reads the cassettes‘ data
(approx. 10 seconds).
Selecting the cassette, displaying the software version
• Select the cassette you want to program (e.g.
Box 4
) by
repeatedly pressing the button
if necessary.
—> The display shows e.g. the menu “
Box 4 DVBS2-MPTS
“:
“
Box 4
” stands
for
slot 4
”
DVBS2-MPTS
” type of cassette
”
V 10
”
software version of the cassette
BE–Remote
please wait …
V 40
t > 10 s
Ein / On
Box 4
V 10
DVBS2-MPTS
– – –
Box 1
………
………
………
Box 5
………
………
………
+
A