- 32 -
HDTA 614 T ASI
Signal to noise ratio:
"CN …" indicates the current signal to noise ratio, in order to estimate the
quality of the input signal.
—> In addition to the indicator in the display, there is also a status LED
which indicates the quality of the received transport stream:
1
2
4
5
6
7
9
8
0
3
6
Status LED channel strip A
7
Status LED channel strip B
8
Status LED channel strip C
9
Status LED channel strip D
LED indicator
Indication
Green
Signal quality is good
Orange
Signal quality is poor
Red
No signal
Red<–>Green
Data rate overflow (output)
Off
Channel strip (modulator) off
• Press the
button.
—> The "Station filter" – e.g. "
01/06
" submenu is activated.
o
Per ation
with
a
Ca
module
In order to descramble scrambled channels a corresponding smart card is
needed.
The channels to be descrambled are set in submenu "station filter".
s
tation
filter
In this menu stations (services) of a transponder can be switched off.
Herein you select which scrambled station should be descrambled using an
adequate CA module (only via tuner "A" and "C").
01/06
Bx 4A TV +
Das Erste
