GSS HDMT 1000 ASI LAN, Assembly Instructions Manual

Page: 32 / 43

- 32 - HDMT 1000 ASI LAN / HDMT 1001 C
Reducing the value of “Number 1”.
—> With the station filter switched “ on »]ÊÌ iʺ ՓLiÀÊ£»ÊV>˜ÊLiÊ`iVÀi>Ãi`°Ê/œÊ
`œÊÌ ˆÃ]ʜLÃiÀÛiÊÌ iʺ ՓLiÀÊÓ»ÊvœÀÊ>««ÀœÝ°ÊÎäÊÃiVœ˜`ÃÊ>˜`ʘœÌiÊÌ iÊ ˆ} -
est value. Add roughly 10 % to this value. Do not decrease the “Number 1”
lower than the value of “Number 2”.
Is the “Number 1” lower than “Number 2” question marks “ ?? ” appear
in the display.
Bx 4A
SR=6500 (6650) ?? STUFFING
Ê UÊ *ÀiÃÃÊÌ iÊ button.
—> The “Setting a substitute signal in the case of an incorrect input signal”
– “ FAILURE ” menu is activated.
Setting a substitute signal in the case of an incorrect input signal
You use this menu to set whether a QAM signal filled with “ Null Packets »]Ê
a QAM signal filled with null packets and self-made tables ” Tables “ or a
“ Single Carrier ” signal should be provided as an output signal whenever an
incorrect input signal occurs. Self-made tables are transmitted furthermore.
Bx 4A
Null Packets FAILURE
Ê U Use the buttons to set the output signal required.
Ê UÊ *ÀiÃÃÊÌ iÊ button.
—> The “Setting the transport stream ID and the ORGNET-ID” – “ TS/ONID ”
menu is activated.