- 9 -
HDE 166
4
t
he
Control
panel
at
a
glanCe
4.1 f
unCtions
of
the
Control
panel
but tons
S
M
To move the cursor
To adjust values and
functions
To save the programmed
data
To switch to the next
menu
4.2 m
enu
items
Program the Encoder module using the buttons on the head-end station control
panel. The menus appear on the two-line display of the control panel.
The parameters and functions to be set are underlined.
With the button select the channel strip / other modules.
You can use the button to select the following menu items:
– LAN settings:
Hardware IP address
IP mask (sub net mask)
IP gateway
UDP-Port
– LAN output settings
MPTS/SPTS
Output IP address(es)
MAC address of destination device (only at unicast connection)
Transmission protocol / Port number
Quantity of data packets / Forward error correction / Transmission channel
Transport stream and ORGNET-ID
– Input settings
Bitrate
Standard
Aspect ratio
Sharpness
Audio data rate
Volume
Station number
Station name
– Factory reset
– Save data
