- 21 -
HDE 166
—> The "Data rate of the video signal " – "
BITRATE
" submenu is acti-
vated.
d
ata
r ate
of
the
video
signal
You can use this menu to set the data rate at which the video signal is to be
encoded. The higher the data rate, the higher the quality of the transmitted
video signal.
AV 1
…4
10.0 Mbps
BITRATE
• Use the
buttons to set the data rate of the video signal
("
2.0"
… "
15.0"
Mbit/sec). If only audio signals are to be encoded, set
the data rate to "
Audio only
". In setting "
Off
" the input is switched off.
• Press the button.
—> The "TV standard" – "
NORM
" submenu is activated.
tv
standard
In this menu the TV standard of the input signal is to be set - "
PAL BG 4.43 MHz"
or "
PAL N 3.58 MHz"
.
AV 1
…4
PAL BG
NORM
4.43 MHz
• Use the
buttons to set the desired TV standard.
• Press the button.
—> The "Aspect ratio" – "
ASPECT
" submenu is activated.
