- 19 -
HDE 166
Q
uantit y
of
data
paCkets
f
orward
error
CorreCtion
/ t
r ansmission
Channel
In this menu you set the quantity of the data packets to be transmitted, the for-
ward error correction FEC and the transmission channel. If the forward error
correction is used the data to be transmitted is encoded in a redundant way
so that the addressee can correct transmission errors.
IP 1
…4
7 off
PKTS/FEC
Defining the quantity of data packets
• Press the button to select the data packet digit.
• Using the
buttons define the quantity of MPEG data packets in one IP
data packet ("
1
" … "
7
").
Setting the forward error correction
• Press the button to select the forward error correction.
—> In position "
off
" the forward error correction (FEC) is switched off.
• Using the
buttons set the desired value of the FEC ("
off", "10/9
" …
"
20/19
").
Setting the transmission channel
• Press the button to select"
Annex…
".
• Use the
buttons to set the desired transmission channel ("
AnnexA
" /
"
AnnexB
").
• Press the button.
—> The "Transport stream ID and ORGNET ID" – "
TS/ONID
" submenu is
activated.
