- 18 -
HDE 166
• Using the
buttons select the digit of the MAC address displayed to be set.
• Using the
buttons set the desired MAC address.
• Press the button.
—> The "Transmission protocol / Port number" – "
MODE / PORT
" sub-
menu is activated.
t
r ansmission
protoCol
/ p
ort
number
In this menu you can define the transmission protocol and the port number.
IP 1
…4
UDP
MODE/PORT
1234
Selecting the transmission protocol
• Press the button to select "
UDP
".
• Using the
buttons to select the desired transmission protocol:
—> "
UDP
" – The "User Datagram Protocol" is for the connectionless
(without handshake) transmission of data to a certain application.
The port number of the service is also sent which the data should
obtain.
—> "
RTP
" – The "Real-time Transport Protocol" is for continuously trans-
mitting multimedia data streams in an IP network. Unlike UDP, the
header is transmitted which makes the data transmission more ro-
bust.
Setting the port number
• Using the
buttons select the digit of the port number displayed to be set.
• Using the
buttons set the desired port number.
• Press the button.
—> The "Quantity of data packets, Forward error correction, Transmis-
sion channel" – "
PKTS / FEC
" submenu is activated.
