- 21 -
- 21 -
Automatic channel search
In this menu, select the channel from the data stream that is
to be made available through this channel strip.
If the error message “
no transponder
” appears, no input
signal is present. In this case, you should check the previous
settings as well as the configuration of the SAT receiver.
If the “
scanning ...
” message appears on the display, the
table of received channels is being read. Please wait until
this process is finished.
As soon as the automatic channel search has found all of the
TV or radio stations, the corresponding data appears in the
display of the head-end station.
Meaning of the indicators shown in this example:
“
01/08”
– The first of a total of 8 TV channels is being
shown or has been activated.
“
+
” –
The audio stream for the current TV channel is
available in several languages.
„TV”
–
The data on the display corresponds to a TV
channel.
“
ZDF”
– Station
name
Other possible indicators:
“RA”
–
The data on the display corresponds to a
radio station.
“
*
“ –
A star indicates that this TV or radio station is
encoded.
To enable the stations, a CA module and a
smart card from the respective service provider
are required.
Bx 1A
ZDF
01/08 + TV
M
/
Bx 1A
ZDF
01/08 + TV
M
/
