- 9 -
HD2CT 860 C
3.3 C
onneCting
the
Qam
module
H
I
E
D
F
G
Fig. 4
• Connect the RF inputs
E
(input "A") and
F
(input "B") on the QAM mod-
ule (fig. 4) to corresponding signal sources via the preinstalled F terminals
in the rear wall of the head-end station through the cable inlets
H
using RF
cables made on-site.
• After programming, connect the modulator output
G
to one of the input
sockets
I
of a retrofitted output collector.
• Connect the head-end station to the mains power supply.
