GSS DRS 550 HDMI Operating Instructions Manual Download Page 54

Page: 54 / 68

- 54 -

12.2

Locking channels

• Use the

MENU

button to display the menu “

Main Menu

”.

• Use the

▼

▲

buttons to activate the line “

List Manager

”

and confirm using

• Activate line “

Main TV List

” or “

Main Radio List

” and con-

firm using

• Use the

▼

▲

buttons to select the channels to be locked

and use the

A/B

button to mark for locking.

—> The channels marked for locking are identified by

“

”.

• Press the

button.

• In the menu which appears “

Save changes?

” use the

◀

▶

buttons to confirm the procedure with “

Yes

” or

cancel it with “

”.

• Press the

button and then press the

button.

• In the “

Main Menu

” use the

▼

button to activate the line

“

Parental Lock

” and confirm using

—> The menu “

Parental Lock

” appears with the active

line “

Set Access Rights Level

”.

• Confirm line “

Set Access Rights Level

” using

• In the selection menu which appears use the

▼

button to

select the menu “

Lock System Se Channels

”.

• Press the

button.

• Enter four-digit PIN code using

…

• Press the

button.

• In the menu which appears “

Save Changes?

” use the

◀

▶

buttons to confirm the procedure “

Yes

” or to cancel

it “

”.

• Press the

button and then press the

button.

12.2.1 Unlocking channels

• Use the

MENU

button to display the menu “

Main Menu

”.

• Use the

▼

▲

buttons to activate the line “

List Manager

”

and confirm using

• Enter four-digit PIN code using

…

• Activate line “

Main TV List

” or “

Main Radio List

” and con-

firm using

• Use the

▼

▲

buttons to select the channels to be un-

locked and use the

A/B

button to unlock them.

• Press the

button.

• In the menu which appears “

Save Changes?

” use the

◀

▶

buttons to confirm the procedure “

Yes

” or cancel

using “

”.

• Press the

button and then press the

button.

• In the “

Main Menu

” use the

▼

button, if necessary, to

activate the line “

Parental Lock

” and confirm using

Summary of Contents for DRS 550 HDMI





































































Search results

Summary of Contents for DRS 550 HDMI

Reviews:

Brands by name

Popular brands

GSS DRS 550 HDMI, Operating Instructions Manual

Search results

Summary of Contents for DRS 550 HDMI

Reviews:

Brands by name

Popular brands