GSS DRS 550 HDMI Operating Instructions Manual Download Page 28

Page: 28 / 68

- 28 -

8.4.2

Setting the date

• In the menu “

Time/Date

” use the

▼

▲

buttons to acti-

vate the line “

Date

” and confirm using

—> In the related setting display, a cursor appears next

to the day.

• Use the

▼

▲

buttons to display the current day.

• Use the

◀

▶

buttons to place the cursor next to the

month display.

• Use the

▼

▲

buttons to display the current month.

• Use the

◀

▶

buttons to place the cursor next to the year.

• Use the

▼

▲

buttons to display the current year.

—> Alternatively, you can use the

(red) button to de-

lete the digits left of the cursor and use the

…

buttons to enter the digits of the date. The cursor can
be controlled using the

◀

▶

• Confirm the setting using

8.4.3 Setting

the

local time

• In the menu “

Time/Date

” use

▼

▲

to select the line

“

Local Time

” and confirm using

—> In the related setting display, a cursor appears next

to the hour.

• Use the

▼

▲

buttons to display the current time (hours).

• Use the

◀

▶

buttons to place the cursor next to the

minutes.

• Use the

▼

▲

buttons to display the current time (minutes).

—> Alternatively, you can use the

(red) button to de-

lete the digits left of the cursor and use the

...

buttons to enter the time. The cursor can be control-
led using the

◀

▶

buttons.

• Confirm the setting using

8.4.4 Setting the

time zone

The time zone indicates the difference between the time which applies at your location
and GMT time (Greenwich Mean Time, longitude “0”).

• In the menu “

Time/Date

” use the

▼

▲

buttons to activate

the line “

Time Zone

” and confirm using

• In the selection menu which appears select the desired

time zone using

▼

▲

—> Valid for Germany: “

Amsterdam GMT + 1

”.

• Confirm the setting using

Off

15|. Aug. 2008

09 : 25

Amsterdam GMT + 1

Automatic daylight saving time

Time zone

Automatic Time Update

Local Time

Time / Date

Date

Exit

Back

MENU

Off

15. Aug. 2008

09| : 30

Amsterdam GMT + 1

Date

Automatic daylight saving time

Time zone

Automatic Time Update

Time / Date

Local Time

Exit

Back

MENU

Date

Automatic daylight saving time

Automatic Time Update

15. Aug. 2008

13 : 18

Amsterdam GMT + 1

Local Time

Time / Date

Time zone

Exit

Back

MENU

London GMT

Amsterdam GMT +1

Helsinki GMT +2

Summary of Contents for DRS 550 HDMI





































































Search results

Summary of Contents for DRS 550 HDMI

Reviews:

Brands by name

Popular brands

GSS DRS 550 HDMI, Operating Instructions Manual

Search results

Summary of Contents for DRS 550 HDMI

Reviews:

Brands by name

Popular brands