- 15 -
STC 4-16 light
58
Via the
Help
menu you can call up the assembling instructions (PDF) as
well as a ZIP file containing a list and all licences of the used Open-
Source software.
59
Overview of the transponder set, with input frequency, C/N value,
output frequency and data rate. Via the background colour of col-
umn
Line
you are informed about the quality of the input signals
( good/ bad/ no signal), a possible exceeding the output data
rate ( ), or whether the modulator is switched off ( ).
—> If in menu Configuration/Input (page 16) transponder names are
NOT assigned, the name of the first station of each transponder is
displayed.
—> The maximum displayed C/N value is 15.0dB at DVB-S resp.
20.0dB at DVB-S2. This means the actual value is ≥15/20dB.
65
Via button
Download
a configuration protocol can be stored as text file
resp. opened using a text editor.
—> From this protocol file e.g. a list of the programmed stations can be
prepared using e.g. a text editor.
66
Herein notes are displayed, which you can enter in menu System/User.
P
erfor m
Changes
Before leaving a menu
, changes must be transmitted to the head-end station.
• Therefore click on button
.
After that
is displayed for a short time in the upper right corner.
n
umber
for m at
For entering/indication of the different IDs the number format can be set to
hexadecimal or decimal in menu
System > Firmware
.
