Page 3 of 4
DIBC1224-1230-R3
This external LED is optional and will mirror the internal LED operation that can be seen in the status LED
window on the label. To utilise the external LED, the anode (+) (of the external LED) should be connected
to the GREEN wire. The cathode (-) should be connected to the vehicle chassis or the battery negative.
LED indication - internal and external LED
Basic Wiring Diagram:
To Ignition Switch of vehicle
MODE SELECT
Type A (14.4V)
Type B (14.6V)
Type C (14.8V)
LED
Connector for optional
DBM-12
( DBM-12 Available in 5M or 10M Length)
LED
Black-Earth/GND
Red -12V Ignition
Yellow - Main
Violet - Auxilary
Connector Wiring Colour Guide
NOTE: This connection is for output monitoring of voltages.
DO NOT short wires or connect to any input sources!
