GSi TYMPSTAR PRO, User Manual

Page: 34 / 134

Data Transfer
When the DATA TRANSFER button is pressed, a data record containing the
stored test data is transmitted to an external computer. Data is transferred as a
complete battery of all saved test results. The data transfer format details may be
found in the GSI Instrument Services manual.
Configure
The CONFIGURE button displays the configuration screen. From this screen, it
is possible to view the instrument information such as serial number, software
version and the calibration information. This button displays setup options to
update the TympStar Pro software, set the date and time, configure the cursor,
adjust the screen brightness, set altitude, set print settings and export log files.
Pressing the CONFIGURE button a second time returns to the previous screen.
•
Update - Place a USB drive with the appropriate update loaded (device,
fonts or config settings) into one of the USB ports. Select Update and
update type and then Yes from the confirmation dialog. Software updates
must be obtained from GSI or an authorized GSI representative. A
message is displayed if no USB disk is found.
•
Print Settings - Selecting the button displays a printer settings dialog to
select the printer protocol, paper size and what action is taken when the
Print button is pressed.
•
Export Logs - This option sends the log files from the instrument to an
attached USB Drive. A message is displayed if no USB drive is found.
Settings Menu -
This option displays a dialog box with device settings options.
•
Transducer -Select the transducer (insert or headphone) to be used for
contralateral acoustic reflex testing.
•
Display Pointer - This check box is selected to have the mouse pointer
arrow visible on the screen. When unchecked the pointer does not
appear.
•
Date and Time - Select to change the date and update the time displayed
on the TympStar Pro. Select Keypad to access numerical keypad. A
keyboard may also be used to update the date and time from the stand-
alone instrument.
•
Brightness - Select to change the brightness of the screen.
•
Altitude - Select to change the altitude where the instrument is being
operated. Changing this setting impacts the calibration of the device and
updates the last calibration date.