GSi Smart Climate 310, User Manual

Page: 62 / 102

62 Smart Climate 310 rev. 03
Adjusting the Min. T° for the 0-10V Heating Output
The minimum temperature is the temperature below which the 0-
10V heating output starts operating at its minimum intensity. The
minimum temperature can be adjusted from -40 to 120°F (-40 to
48.9°C) and can be set as an absolute value or it can be related to
the set point, which means it is automatically adjusted when the set
point changes (refer to the User Setup to set this option).
To adjust the minimum temperature for the 0-10V heating output,
proceed as follows:
1. Press 0-10v Output. The minimum temperature of the
0-10V output is displayed. This is the temperature
below which the output is activated.
Make sure the 0-10V output is configured in heating mode in the
USER SETUP.
2. Press Adjust . The minimum temperature flashes on
the display.
3. Use the arrow keys to set it to the desired value.
Adjusting the Minimum and Maximum Intensity of the
0-10V Heater
To adjust the minimum and maximum intensity for the 0-10V
heater, proceed as follows:
1. Press
0-10v Output
.
Make sure the 0-10V output is configured in heating mode in the
USER SETUP.
2. Press the down-arrow key in order to select the
Min/Max heat display.
3. Press Adjust . The minimum heat intensity flashes on
the display.
4. Use the arrow keys to set it to the desired value.
5. Press
Adjust once again, the maximum heat intensity
flashes on the display.
6. Use the arrow keys to set it to the desired value.