GSi Smart Climate 310, User Manual

Page: 32 / 102

32 Smart Climate 310 rev. 03
Low T° Override Functions
The controller can lower the minimum ventilation speed when the
room temperature gets too cold. Refer to the User Setup menu to
enable low temperature override functions.
Selecting the Minimum Ventilation Stage
Select which variable fan stage is used to provide minimum
ventilation (refer to the previous section for further information).
1. Press Minimum Ventilation . The minimum ventilation
stage is displayed.
2. Press Adjust . The stage starts flashing.
3. Use the arrow keys to select the desired variable stage
and press Adjust again to validate.
Adjusting the Minimum Ventilation Speed
This section shows how to set the speed of the variable fans that
are used in minimum ventilation.
1. Press Minimum Ventilation .
2. Press the down-arrow key in order to select the minimum
ventilation speed of the first variable fan output.
Only variable outputs that are assigned in variable mode are
available (see variable output assignment).
3. Press
Adjust
. The fan speed starts flashing.
4. Use the arrow keys to set the speed and press
Adjust
again to validate.
5. If the minimum ventilation stage uses another variable
output, press the down arrow key to select it.
6. Repeat steps 1 to 5 to set the minimum ventilation speed
of all variable outputs that are used in minimum ventilation.