26 Smart Climate 310 rev. 03
Viewing Probe Temperatures
Temperature readings of each individual probe can be displayed
as follows. The readings of each activated probe are displayed,
whether they are assigned for the average room temperature or
not.
To display probe temperatures, proceed as follows:
1. Press on the
Current Conditions
button. The average
room temperature is displayed.
2. Press on the current condition down arrow key once. The
current reading of every activated probe is displayed.
3. Press on the navigation
down-arrow key once. Today's
minimum reading of probe 1 is displayed, along with the
time and date.
4. Press on the navigation down-arrow key once again.
Today's maximum reading of probe 1 is displayed, along
with the time and date.
5. Keep pressing the navigation
down arrow key to display
the minimum and maximum temperatures of the past 6
days for each remaining probe.
Viewing Outside Temperatures
To display the outside temperature, proceed as follows:
1. Press on the
Current Conditions
button.
2. Press on the current condition
down arrow key to select
the outside temperature sensor menu.
Available if the outside temperature probe is enabled in the USER
SETUP.
3. Press on the navigation
down-arrow key. Today's minimum
outside temperature is displayed, along with the time and
date.
4. Press on the navigation
down-arrow key once again.
Today's maximum outside temperature is displayed, along
with the time and date.
5. Keep pressing the navigation
down-arrow key to display
the minimum and maximum outside temperatures of the
past six days.
Summary of Contents for Smart Climate 310
