GSi Smart Climate 310, User Manual

Page: 17 / 102

Smart Climate 310 rev. 03 17
7. Press Adjust , the day flashes. Use the arrow keys to set
the day.
8. Press Adjust once again, the year flashes. Use the arrow
keys to set the year.
Setting the Parameters
Setting the parameters allows you to customize the controller to
your needs. This is normally done once upon installation. A
template is available at the end of this manual to write down all
these parameters.
NOTE
: The controller has 6 built-in relays used to control on-off
stages. It automatically assigns a relay to each stage according
to your particular setup.
To set the parameters, proceed as follows:
1. Press User Setup .
The following parameters are presented below in the order they
appear on the display. The installer's password must first be entered
to access these menus.
2. Press Adjust .
3. Use the arrow keys to scroll to the desired setting.
4. When you are finished adjusting a parameter, press
Adjust to validate the new value and to return to the
display mode.
5. Press the down-arrow key to move to the next parameter.
How to Set All Possible Parameters
Contrast
Set the contrast of the LCD screen to the desired value (from 10 to
100%).
Time of Day Format
Select the time format.
Temperature Units
Select the temperature units: Fahrenheit (F°) or Celsius (°C).