GSi Smart Climate 310, User Manual

Page: 14 / 102

14 Smart Climate 310 rev. 03
Choosing the Motor Type
The various motors available in the industry have been divided into
ten categories and the controller has been programmed with a
different motor curve for each of these categories.
NOTE : The third variable output operates on a 0-10V signal and
does not use a motor curve.
To select the motor curve, proceed as follows:
1. Press
Stages .
2. Press the down-arrow key to select the Motor curve V1
menu.
3. Press
Adjust.
The motor curve of the first variable output
flashes on the display.
4. Use the arrow keys to adjust the motor curve and then
press Adjust again to validate.
5. Press the down-arrow key to select the motor curve of the
second variable output.
6. Use the arrow keys to adjust the motor curve and then
press Adjust again to validate.