GSi Cumberland PNEG-1333, Installation And Owner'S Manual

Page: 42 / 68

4. Assembly
42 PNEG-1333 Turkey Poult Feeder System
Winching (Continued)
Figure 4BC
13. Begin installing the drops at the winch and proceed to the end of the feeder line.
14. Clamp off the ends of the winch cable around a truss on the ends of the feeder line. Use a cable
clamp sleeve to clamp the drop cable to the winch cable. Thread the drop cable through the tube
hanger and adjustment clip. Cut the winch cable behind the cable clamp.
15. Level the feed line using the adjustment clips. Trim excess drop cable close to the clips. Keep tension
on hanging cables at all times to prevent the pans from resting in the litter.
Ref # Description
A Cable Adjustment Clip
B Wire Hanger