Stiffener Part Number Description
The part numbers in the following tables use an “XX” at the end of the number to represent the gauge of
the material.
Color Codes for Stiffener Gauge Identification
Use these charts to interpret the color code painted on the ends of the stiffeners.
NOTE:
See
for ring location of stiffeners.
Table 6-1
Color codes for stiffener gauges
Sidewall Gauge
Color Code
0
No Color (Zinc)
2
Ochre
5
Fluorescent Green
6
White
8
Yellow
9
Dark Blue and Orange
10
Light Blue
11
Pink
12
Black
13
Dark Blue and Yellow
14
Dark Green
15
Red and Brown
16
Dark Blue
17
Light Blue and Pink
18
Orange
Table 6-2
Stripe color codes for stiffener gauges
Stiffener Type
Stripe Color
Base Stiffener
Red
Back (Laminated)
Dark Green
Insert (Laminated)
Gold
Close Punched
Light Blue
Special Galvanized 115
Fluorescent Red and
Orange
Special Galvanized 140
Florescent Pink
Special Galvanized 165
Florescent Pink and
Fluorescent Orange
12–Bolt Pattern
Stiffener
Brown
NOTE: Extra colored stripes will be centered on
the gauge color. If more than one color of stripe is
needed, they will be painted next to each other
and centered on the gauge color.
PNEG-4472
72 Ft Diameter Z-Tek Bins
51
Summary of Contents for 40-SERIES
