Chapter 3: Hardware requirements
Bolt S-10252
An S–10252 is a 1/2 x 1-3/4 in. YDP flange bolt.
Bolt (S-10252) is used in the following locations:
• Use in tension plate to eave bracket connection.
• Use in rafter clip to rafter connection.
• Use in laminated purlins.
• Use in purlin clip to rafter and purlin clip to purlin connections.
• Use in X-brace to rafter connection.
• Use in center collar splice connection.
• Use in center collar channel clip to center collar.
• Use in rafter to center collar and rafter to eave bracket
connections.
• Delivered in a box, not a bucket.
A
1.833 in. (4.66 cm)
C
Grade 8
B
1.495 in. (3.80 cm)
D
Grade 8.2
Bolt S-10261
An S-10261 is a 7/16 x 3-1/4 in. JS bolt that is pre-assembled with a sealing washer.
Bolt (S-10261) is used in the following locations:
• Use in wind ring splice and over pipe connections.
• Lid color of bucket is natural (clear).
A
3.645 in. (9.26 cm)
C
Grade 8
B
3.250 in. (8.26 cm)
D
Grade 8.2
PNEG-4472
72 Ft Diameter Z-Tek Bins
33
Summary of Contents for 40-SERIES
