Installing the End Cap to the Ladder
The end cap helps to protects your hands from the sharp edges on the ends of the ladder.
1. Install the end caps (13) to both the right and left side of the ladder by snapping the end caps (13)
into the top of the ladder.
2. Secure the end cap (13) in place using a flange bolt (14) and flange nut (8).
Figure 4-4
End cap assembly
8
5/16 in. flange nut (S-3611)
14
5/16 x 1 in. flange bolt (S-7470)
13
Ladder end cap (LDR-5011)
PNEG-2132
Pressure Cooled Quiet Portable Dryer
33
