GSI Group 890-00583, User Manual

Page: 33 / 90

Chapter 6: Configuring a Temperature Zone
Figure 6-4 Graph showing an example of a maturation curve
TEMPERA TURE
TIME
(DAYS )
ALERT 3
HIGH ALERT
THRESHOLD
TEMPERA
TURE MA
TURATIO
N CURVE
INDOOR
TEMPERATURE
READING
LOW ALERT
THRESHOLD
LOW OFF
SET CURV
E
HIGH OFF
SET CUR
VE
1 2 3 4 5
ALERT 2 ALERT 1
SET OFF B Y THE
HIGH OFFSET CURVE
SET OFF B Y THE
LOW OFFS ET CURVE
SET OFF B Y THE
HIGH OFFSET CURVE
Setting the High and Low Temperature Thresholds
In a temperature zone, an alert is set off when the temperature is below or above the given temperature
threshold.
What You Should Know
NOTE: The temperature maturation curve must be disabled in order for the system to use the high and low
temperature thresholds.
1. In edit mode, under the Limits tab, click on the edit field next to the red bell.
2. Enter the high limit threshold using the keypad.
3. Click on the edit field next to the blue bell.
4. Enter the low limit threshold using the key pad.
Setting the Critical Temperature Threshold
At anytime, whether or not you are using the outdoor temperature compensation, if the temperature
reaches the critical threshold, an alert is set off.
1. In edit mode, under the Limits tab, click on the edit field next to the Critical T button.
2. Use the keypad to enter the critical temperature.
895–00677 Agri-Alert 128 Touch 33