USER MANUAL
8
Chapter 4 NVR Starting up
4.1 Start Wizard
The
Startup Wizard
will help you configure your system and get your NVR working quickly.
4.1.1
Start Wizard
Click the
Start Wizard
to proceed to the next step
4.1.2
Network Configuration
If your connected router allows the use of DHCP, please check the
DHCP
box. The router will
automatically assign all the network parameters for your NVR. If you would like to manually
assign the network you can do so under the Parameters tab:
IP Address
: The IP address identifies the NVR in the network. It consists of four groups of
numbers between 0 to 255, separated by periods. For example, “192.168.001.100”.
Subnet Mask
: The Subnet Mask is a network parameter which defines a range of IP addresses
that can be used in a network. If IP address is like a street where you live then the subnet mask is
like a neighborhood. The subnet address also consists of four groups of numbers, separated by
periods. For example, “255.255.000.000”.
