background image

 

 

 

 

RECOMMENDATIONS OF CHARACTER GENERAL 

 

Read  carefully all  the  instructions  of  this  document  prior  to  making  any  operation  installation,  connection  and 
manipulation of the GruppoSTG Fabbrica Srl module .  

  

The advice provided for a 

GruppoSTG Fabbrica Srl 

module 

can 

be extended to several models.  

  

GruppoSTG Fabbrica Srl 

shall not be liable for loss, breakage, damage or costs additional to a result of an 

erroneous manipulation of the product as part of staff stranger to this company.  

  

The  instructions  on  how  to  use,  sell,  install  and  connect  the  photovoltaic  modules  safely  is  to  use 
exclusive  of  technical  professionally  qualified  installation  of  the  modules  and  in  possession  of  the 
qualifications required.  

  

No person deprived of such qualifications Professional is authorized to perform the operations described.  

  

  

IMPORTANT!

 

 

 

GruppoSTG Fabbrica Srl do not assumes any responsibility and denies explicitly any obligation resulting 
loss,  damage  or  expense  arising  out  of  or  in  any  way  connected  with  installation,  management, 
operation or maintenance described in this manual. GruppoSTG Fabbrica Srl assumes no responsibility 
in  relation  to  violations  of  patents  or  other  rights  of  third  parties  that  may  result  from  the  use  of 
GruppoSTG Fabbrica Srl modules . 

 

No license is granted by implication or under any patent or patent rights. The information contained in 
this  manual  is  believed  to  be  reliable,  but  does  not  constitute  an  express  and/or  implied  warranty  . 
GruppoSTG Fabbrica Srl reserves the right to make changes to the product, to specifications or to the 
manual without prior notice and at its sole discretion. 

 

 

 

Observe also the instructions supplied with the other components of the system to power solar.  

  

The manual installation will relate to installations on the ground, on the roof floor and on the roof tilted in 
modules framed solar   

  

These instructions are part and parcel of the documentation solar system in which are installed the  
photovoltaic modules and must therefore be preserved with the documentation overall of the system.  

  

At the end of the installation, hand over these instructions to the user of the system, i.e. the customer.  
Remember the customer to keep these instructions with the documentation overall solar system

.

 

Summary of Contents for VE1ZZPV W Series
























Reviews: