Chassis 12.6
GR
UNDIG Ser
v
ice
Allgemeiner
T
e
il / Gener
al Section
1 - 8
6
SETTINGS
____________________________________________________________________________
Assigning channel positions
automatically with the ATS Channel Search
The television set is equipped with an automatic channel search system.
You start the search and can then sort the television channels into order of
preference.
99 preset positions are provided, to which you can assign television stations
from the antenna or from the cable connection.
You can also delete from the channel list television channels which were found
more than once or which have poor reception.
The procedure described in the following only applies to when the television is
switched on for the first time.
1
Press the »
IO
« button on the television set to switch to stand-by mode and
press »
P+
« to activate the remote control.
– The »
Избор на език
« (language selection) menu appears.
2
Select language with »
P+
«
o
r »
P-
« and press »
OK
« to confirm.
– The »Adjust country« menu appears.
3
Select country using »
P+
« or »
P-
« and confirm with »
OK
«.
Note:
If your country is not displayed, select the line » . . . . . . . «.
– The »Automatic Tuning System« menu appears and the station search
begins.
– The automatic search may last a minute or longer, depending on the num-
ber of television channels received.
– After the search the television switches to channel position 1 and the
» Sort« menu appears.
Sorting television channels
1
In the » Sort« menu, select the channel to be moved with »
P+
« or »
P-
«.
2
Highlight the channel with »
OK
«.
3
Select the new channel position with »
P+
« or »
P-
«.
4
Press »
OK
« to save the setting.
Note:
To sort the other television stations, repeat steps
1
to
4
.
Sort
OK
Sort
?
Delete
Ǻ
Return
TXT
TV
P 1
ARD
P 2
ZDF
P 3
RTL
P 4
SAT1
P 5
PRO7
P 6
BR 4
P 7
P 8
P 9
P 10
ĵ
–––––––––––––––––
Ł
Automatic Tuning System
TXT
Please wait
–_–_–_–_–_–_–_–_–_–_–_–_–_–_–_–_–_–_
Adjust country
Ǻ
OK
TXT
BG Bulgaria
CZ
Česká rep.
D
Deutschland
H
Magyarország
HR Hrvatska
PL
Polska
RO Romanya
RUS Russia
SK Slovensko
YU Yugoslavia
*
• • • • • • •
ĵ
––-––––––––––––––––––––
Ł
Избор на език
Ǻ
OK
TXT
BG
Български
CZ
Ćesky
D
Deutsch
F
Français
GB English
H
Magyar
HR Hrvatski
PL
Polski
RO Romin
RUS
PУCCKИЙ
SI
Slovensko
SK Slowensky
ĵ
––––––––––––––––––––––––
Ł
ENGLISH
5
The remote control
Ǽ
Switches off the television (stand-by).
0...9
Switch the television on from stand-by mode;
select channels directly.
0
Select channel positions AV 1 and AV 2.
i
Calls up the »Dialog Center«;
select the previous menu page.
d
Sound on/off (mute).
P+ P-
Switches the television on from stand-by (only »
P+
«);
select channels step-by-step;
move the cursor up/down.
Ǹ Ƿ
Adjust the volume;
move the cursor left/right.
OK
Activates various functions and saves settings.
TXT
Switches between teletext and TV mode;
terminates the menu function.
Z
Activates the ”zapping” function; zaps between two channels.
z
(red)
Calls up the » Picture« menu;
scrolls back a page in teletext mode.
Ȅ
(green)
Time on/off;
scrolls to the next page in teletext mode.
II (yellow)
Selects chapters in teletext mode.
F
(blue)
Calls up menu functions;
selects topics in teletext mode.
TV-G
Not used.
PIP
Not used.
E
Switches between large- and wide-screen playback.
?
Displays programme information.
VCR/SAT
For operating the basic functions of a GRUNDIG video recorder
or press and hold down satellite receiver button »
VCR
« or
»
SAT
«. Then select the button you require.
The functions available to you depend on the model of the
device you are using. Just try it out.
OVERVIEW
__________________________________________________________________________________
3
2
1
6
5
4
9
8
7
0
Z
TXT
E
F
Ȅ
P
OK
P
T
E L E
P
I L O T 75 1 C
TV-G
PIP
VCR
SAT
Operating Hints
This chapter contains excerpts from the operating instructions.
For further particulars please refer to the appropriate user instructions the part number of which is indicated in the relevant spare parts list.
