Grundig GTN 38250 TGCW, User Instructions

Page: 31 / 44

31
EN
7 Maintenance and
cleaning
7.1 Loading Door Inner Surface
The hair and fibres that are
separated from the laundry during
drying process is collected by the
Fibre Filter.
C
Fibres are formed during
wearing and washing
clothes.
You can clean the filter slot
with a vacuum cleaner.
A
WARNING:
After each
drying cycle, clean the
fibre filter and the inner
surface of the loading
door. .
To clean the fibre filter:
• Open the loading door.
• Hold the first part (inner filter)
of the two part fibre filter and
remove it by pulling it upwards.
• Collect the hair, fibres and cotton
balls with hand or with a soft
cloth.
• Remove the second part (outer
filter) by pulling it upwards.
C
Ensure that hair, fibre and
cotton balls do not fall into
the slot where the filters
are installed.
• Open both fibre filters (inner and
outer filters) remove the hair,
fibre, cotton balls with your damp
hand or a vacuum cleaner or a
cloth.
• Clean both filters under water
running in reverse direction of
fibre accumulation or with a soft
brush. Dry the filter before placing
it back.
• Insert the fibre
filters on one
another and
place it back in
its place.
• Clean the loading door interior and
its washer with a soft damp cloth.