Grundig GTN 38250 TGCW, User Instructions

Page: 29 / 44

29
EN
C
Child Lock is deactivated
when the machine is
switched off and on with On/
Off/Cancel button.
When the Child Lock is activated:
Display symbols will not change
even if the position of Programme
Selection knob is changed while the
machine is running or in halt.
If the Child Lock is deactivated
after changing the position of
the Programme Selection knob
while the machine is running, the
machine stops and new programme
information is displayed.
6.9 Changing the programme
after it has started
After the machine starts, you can
change the selected programme
and dry your laundry in a different
programme.
1. If you want to select Extra Dry
programme instead of Iron Dry
programme, for instance, press
the Start / Pause button for 1
second to stop the programme.
2. Select Extra Dry programme
by turning the Programme
Selection knob.
3. Press the Start/Pause button to
start the programme.
Adding / removing laundry in Pause
mode
In order to add or take out laundry
after the drying programme has
started:
1. Press Start/Pause button to
switch the machine to Pause
mode. Drying process will stop.
2. While in Pause mode, open the
loading door, add or take out
laundry and close the loading
door.
3. Press the Start/Pause button to
start the programme.
C
Any laundry added after the
drying process has started
may cause the clothes that
are already dried in the
machine intermingle with
wet clothes and the result
will be wet laundry after the
drying process is over.
C
You may repeat laundry
adding or removing process
as many times as you desire
during drying. However,
this process will increase
the programme time
and energy consumption
since the drying process
will be interrupted
repeatedly. Therefore, it
is recommended to add
laundry before the drying
programme has started.
C
If you select a new
programme by turning
the Programme Selection
knob while your machine
is in Pause mode, then
the current programme
is aborted and new
programme information is
displayed.