Grundig GTN 38250 TGCW, User Instructions

Page: 27 / 44

27
EN
C
You can change the sound
level either before the
programme starts or
while the programme is in
progress.
Anti-creasing
A 2-hour anti creasing programme
to prevent laundry from creasing will
be activated if you do not take the
laundry out after the programme has
come to an end. This programme
rotates the laundry in 10-minute
intervals without heat to prevent
creasing.
6.6 Warning symbols
C
Warning symbols may differ
according to the model of
your machine.
Lint filter cleaning
When the programme is completed,
a warning symbol will appear to
remind that the filter needs to be
cleaned.
C
If the Filter Cleaning symbol
in continuously, refer to
“Troubleshooting” section.
Water tank
When the programme is completed,
a warning symbol will appear to
remind that the water tank needs to
be drained.
If the water tank becomes full while
the programme is running, the
warning symbol will start to flash
and machine will pause. Drain the
water in the water tank and press
Start / Pause button to resume the
programme. The warning symbol
turns off and the programme
resumes operating.
Cleaning the filter drawer
Warning symbol flashes with certain
intervals to remind that the filter
drawer needs to be cleaned.
End Time Setting
End Time Setting function allows
you to delay the ending time of the
programme up to 24 hours.
1. Open the loading door and put
the laundry in.
2. Select the drying programme,
spin speed and, if required, the
auxiliary functions.
3. Press
End Time Setting selection
button to set the desired
End
Time Setting symbol lights up