- 13 -
STC 816
4
i
nstallinG
the
head
-
end
station
4.1 emC
reGul ations
(
e
lectro
m
agnetic
C
ompatibilit y
)
To comply with the current EMC regulations, it is necessary to connect the lines
leading in and out of the head-end station (e.g. Cinch, RF) using standard ca-
ble terminals.
Fig. 8
• According to figure 8 insert the required number of standard cable termi-
nals in the openings provided in the front of the head-end station (fig. 2
Tighten the nuts on the cable terminals until the teeth on the lock washers have
penetrated the exterior coating and a good connection is made between the
housing and the cable terminals.
—>
To maintain compliance with the EMC regulations, the head-end sta-
tion must not be operated without the front cover.
