- 12 -
STC 816 R
4
i
nstallinG
the
head
-
end
station
4.1 r
emove
front
Cover
Fig.7
2
2
1
• Unscrew the locking screws
1
.
• Loosen the mounting screws
2
.
• Slide the front cover upwards and unhook it.
4.2 m
ountinG
the
head
-
end
station
– Install the head-end station vibration-free.
Avoid, for example, mounting the head-end station onto a lift shaft or any
other wall or floor construction that vibrates in a similar way.
–
To avoid too strong heating of the head-end stations it is not admissible
to mount them one upon the other without using thermic precautions (e.g.
permanently air recirculation, ventilation, heat deflectors etc.).
– Ensure that
- the mounting area can support the weight of the head-end station
- there is an adequate ventilation
- the permissible ambient temperature will be maintained
- the mounting position is dry and protected against splashing water.
—> For a complete disconnection from the mains, the mains plug must
be pulled out of the mains socket. Ensure that the mains plug can be
pulled out without difficulties.
