- 20 -
SMCIP 402 C/T
s
tatus
menu
The status menu informs about…
– the device version
DVB-S =>
– – – –
DVB-C
V 5
DVB-S =>
– – – –
DVB-T
V 5
SMCIP 402 C
SMCIP 402 T
– the software version
DVB-S =>
– – – –
DVB-CT
V 5
(e.g. V 5) as well as
– the input signales.
By default no stations are selected in menu station selection –> indication
"– – – –". If stations are selected in menu station selection, it is displayed
whether the tuners A…D are "locked"/"not locked" to an input signal:
DVB-S =>
A–cD
DVB-CT
V 5
—> In this example …
… no station from tuner B is selected (indication "–"),
… stations from tuners A and D are selected and have reception,
… a station from tuner C is selected but reception is disturbed.
Input signal locked => capitals
Input signal not locked => lower case
—> If the ASI input is selected instead of tuner D, its state is displayed
accordingly.
If output mode "
ASI
" is selected (modulator off), you get e.g. the following
indication:
DVB-S =>
A – – –
ASI
V 5
If "
=> OUTPUT
" is selected in menu ASI input selection (transparent mode,
page 31), you get e.g. the following indication:
ASI =>
– – – D
DVB-CT
V 5
• Press the
MODE
button.
