- 18 -
HADA 5100 SPTS
Selecting the transmission protocol
• Press the button to position the cursor under "
UDP
".
• Using the
buttons to select the transmission protocol wished:
—> "
UDP
" – The User Datagram Protocol is for the connectionless trans-
mission of data without acknowledgement from the receiver.
"
RTP
" – The Real-time Transport Protocol additional transmits time infor-
mations for runtime error correction at receiver side.
Setting the port number
• Press the
button to position the cursor under the port number e.g.
"
1234
".
• Use the
buttons to position the cursor under the digit of the port
number displayed to be set.
• Using the
buttons set the port number wished.
Copying the settings to all IP outputs
• Pressing the
button the settings can be copied to the IP autputs
following from the selected on.
—> The display shows "
copy
" for a short time.
• Press the
button.
—> The "Quantity of data packets, Forward error correction, Transmis-
sion channel" – "
PKTS / FEC
" menu is activated.
q
uantit y
of
data
PaCkets
f
orward
error
CorreCtion
t
r ansmission
Channel
In this menu you set the quantity of the data packets to be transmitted, the
forward error correction FEC and the transmission channel. If the forward er-
ror correction is used additional redundant data are transmitted, so that the
addressee can correct transmission errors.
ASI-1
7
off
PKTS / FEC
