- 14 -
HADA 5100 SPTS
• Press the
button.
—> The "Ethernet parameters" – "
ETHERNET
" main menu is activated.
e
thernet
Par a meters
In this menu you specify whether the Ethernet parameters for the cassette are
entered automatically by a connected server ("
DHCP
"), or whether you want
to enter them manually ("
stat
").
—> To assign the cassette uniquely, each IPTV cassette must be allocated
its own IP address.
Bx 4
stat
=>
ETHERNET
Options
—> To skip the setting of the Ethernet parameter press the
button. The "
INPUT
" main menu is activated (page 16).
• Press the
buttons to select manual setting ("
stat
") or automatic setting
("
DHCP
") of the Ethernet parameters.
• Press the button to activate the setting options ("
Options
").
—> The "Hardware IP address" – "
IP-ADDR
" sub menu is activated.
h
ardware
iP
address
To operate the cassette in a network, an IP address must be assigned to
each IPTV cassette. If a manually setting of the Ethernet parameters is se-
lected, set the IP address of the cassette in this menu. If "
DHCP
" is selected,
the "
IP-ADDR
", "
IP-MASK
" and "
IP-GATEWAY
" sub-menus display the param-
eters that were assigned automatically by a connected DHCP server, e.g.
"192.168. 0.128*". The star " * " in the display means that the data is
provided by a DHCP server. If no server is connected, "
0. 0. 0. 0
"
appears in the corresponding menu.
Bx 4
192.168. 0.128
IP-ADDR
