Grundig GSND 6282 S, Owner'S Manual

Page: 61 / 96

12
1.
Connector (1 piece): Used to
attach the water hose to the
rear of the product.
2.
Hose clip (3 pieces): Used to
fix the water hose on the wall.
3.
Water hose (1 piece, 5 meter
diameter 1/4 inches): Used for
the water connection.
4.
Faucet adapter (1 piece):
Comprises a porous filter,
used for connection to the
cold water mains.
5.
Water filter (1 piece
*Optional): Used to connect
the mains water to the pro-
duct. Water filter is not requ-
ired if carboy connection is
available.
3.6 Connecting water hose
to the product
To connect the water hose to the
product, follow the instructions
below.
1.
Remove the connector on the
hose nozzle adaptor in the
back of the product and run
the hose through the connec-
tor.
2.
Push the water hose down
tightly and connect to the hose
wrench or pliers.
4.
Connect the other end of the
hose to the water mains (See
Section 3.7) or, to use car-
boy, to the water pump (See
Section 3.8).
3.7 Connecting to water mains
(Optional)
To use the product by connecting
to the cold water mains, a standard
1/2” valve connector must be
installed to the cold water mains
in your home. If the connector is
nozzle adaptor.
3.
Tighten the connector manu-
ally to fix on the hose nozz-
le adaptor. You may also tigh-
ten the connector using a pipe