Grundig GIN 090, Installation Manual

Page: 30 / 168

30 / 56 EN
Split-type room air conditioner / Installation Manual
If the drain joint doesn’t come with a rubber seal (see Fig. 6.4 - B), do the following:
1. Insert the drain joint into the hole in the base pan of the unit. The drain joint will click in place.
2. Connect a drain hose extension (not included) to the drain joint to redirect water from the unit
during heating mode.
(A) (B)
Base pan hole of
outdoor unit
Seal
Drain joint
Seal
Fig. 6.4
A
In cold climates
In cold climates, make sure that the drain hose is as vertical as possible to ensure swift
water drainage. If water drains too slowly, it can freeze in the hose and flood the unit.
Step 3: Anchor outdoor unit
The outdoor unit can be anchored to the ground or to a wall-mounted bracket.
Unit mounting dimensions
The following is a list of different outdoor unit sizes and the distance between their mounting feet.
Prepare the installation base of the unit according to the dimensions below.
6 Outdoor unit installation