Grundig GCA-B1002B, Owner'S Manual

Page: 16 / 20

DETECT SENSE [000~127] :
Sets the motion detection sensitivity.
BLOCK DISP [OFF, ON, ENABLE] :
Controls the ON/OFF status of the motion
detection block display.
- ON, OFF: Turns the block display on/off.
- ENABLE: If the BLOCK DISPLAY is set to ON, you can choose in this setting with the
SET UP key areas where the motion detection (in block format) should not be displayed.
Using this option is only possible when MONITOR AREA is set to ON. To exit this
setting, press the SET UP key and hold it for a while.
MONITOR AREA [OFF, ON] :
If you choose ON, the areas for motion detection monitoring will be shown on the screen.
AREA SEL [1/4 ~ 4/4] :
Select a monitoring area out of the 4 monitoring areas and set the options below for the
selected monitoring area.
- TOP: Sets the top side of the selected monitoring area.
- BOTTOM: Sets the bottom side of the selected monitoring area.
- LEFT: Sets the left side of the selected monitoring area.
- RIGHT: Sets the right side of the selected monitoring area.
6.11. PRIVACY
When selecting ON, a submenu will appear
where you can set the privacy masks and
their colours. This function is used to mask
specific areas within the frame of the
camera.
14 English