Grundig GBR-IC02, Owner'S Manual

Page: 5 / 8

Step 6:
Attach the Camera Housing Base to the
Flush Mount Adapter’s top plate, aligning
the camera’s rear cable entry with the entry
hole on the Flush Mount Adapter’s top plate.
Step 7:
Align the three Captive Screws with the
mating screw holes on the Camera Housing
Base. Then tighten the three Captive
Screws as shown in the figure.
Step 8:
Position the supplied adhesive-backed
Ceiling Stickers onto the ceiling where the
Camera will be mounted, and cut the ceiling
hole using the template as a guide.
(Diameter: 174 mm)
Step 9:
Run the Ethernet cable (and a power cable
if needed) through the desired cable entry
and insert the Dome Camera with the
attached Flush Mount Adapter into the
opening.
3 English