M 100-T
Allgemeiner Teil / General Section
GRUNDIG Service
1 - 3
Technische Daten
Empfindlichkeit
Mono (S/N = 26dB) ........................................................
≤
1,1
µ
V
Stereo (S/N = 46dB) ........................................................
≤
35
µ
V
Klirrfaktor
Mono (1kHz, 40kHz dev.) .................................................
≤
0,2%
Stereo (1kHz, 40kHz dev.) ...............................................
≤
0,4%
Frequenzbereich (
±
1,5dB) .......................................... 25…15000Hz
Nebenkanalempfindlichkeit
Mono Wide
±
300kHz ...................................................... > 50dB
Narrow
±
300kHz .................................................. > 70dB
Stereo Wide
±
300kHz .................................................... > 50dB
Narrow
±
300kHz ................................................. > 60dB
Geräuschspannungsabstand (IEC Kurve A eff.)
40kHz dev., DIN A, Mono .................................................... 75dB
40kHz dev., DIN A, Stereo .................................................. 69dB
Abschwächer im Kabelmodus ................................................... 12dB
Empfangsbereich
FM (25kHz Schritte) ......................................... 87,5…108,0MHz
MW (1kHz Schritte) ............................................. 522…1611kHz
Stromversorgung
Netzspannung ................................................................. 230V ~
Netzfrequenz ................................................................. 50/60Hz
Max. Leistungsaufnahme ................................................... < 9W
Gehäuse
Abmessungen (B x H x T) ............................. 270 x 95 x 310mm
Gewicht .............................................................................. 3,0kg
Technical Data
Input sensitivity
Mono (S/N = 26dB) ........................................................
≤
1.1
µ
V
Stereo (S/N = 46dB) ........................................................
≤
35
µ
V
Distortion
Mono (1kHz, 40kHz dev.) .................................................
≤
0.2%
Stereo (1kHz, 40kHz dev.) ...............................................
≤
0.4%
Frequency response (
±
1.5dB) ................................... 25…15,000Hz
Adjacent channel selectivity
Mono Wide
±
300kHz ...................................................... > 50dB
Narrow
±
300kHz .................................................. > 70dB
Stereo Wide
±
300kHz .................................................... > 50dB
Narrow
±
300kHz ................................................. > 60dB
Signal-to-noise ratio (IEC curve A effective value)
40kHz dev., DIN A, Mono .................................................... 75dB
40kHz dev., DIN A, Stereo .................................................. 69dB
Attenuation in cable mode ........................................................ 12dB
Frequency ranges
FM (25kHz steps) ............................................. 87.5…108.0MHz
MW (1kHz steps) ................................................. 522…1611kHz
Power supply
Mains voltage ................................................................... 230V~
Mains frequency ............................................................ 50/60Hz
Max. power consumption ................................................... < 9W
Cabinet
Dimensions (W x H x D) ................................ 270 x 95 x 310mm
Weight ................................................................................ 3.0kg
MUTING
MONO
STEREO
AUTO
ANTENNA
CABLE
MHz
kHz
B
A
LOUD
DIRECT
PRO-LOGIC
Testmodus
Aktivieren des Testmodus:
- Gerät ausschalten.
- Tasten "STATION
"
" und "TUNING
T
" gedrückt halten und Gerät
einschalten.
- Es werden jetzt nacheinander alle Segmente des Displays einge-
schaltet.
- Nach einigen Sekunden wechselt die Anzeige dann auf:
- Beim Drücken der einzelnen Tasten wird die jeweilige Taste im
Display angezeigt:
- Beenden des Testmodus durch Ausschalten des Gerätes.
Testmode
Activating the Testmode:
- Switch off the unit.
- Hold the buttons "STATION
"
" and "TUNING
T
" depressed and
switch on the unit.
- Now all segments in the display will be illuminated one after another.
- After a few seconds the display changes to:
- When pressing one of the buttons, the respective button is shown in
the display:
- To end the testmode switch off the unit.
MUTING
MONO
STEREO
AUTO
ANTENNA
CABLE
MHz
kHz
B
A
LOUD
DIRECT
PRO-LOGIC
MUTING
MONO
STEREO
AUTO
ANTENNA
CABLE
MHz
kHz
B
A
LOUD
DIRECT
PRO-LOGIC
MUTING
MONO
STEREO
AUTO
ANTENNA
CABLE
MHz
kHz
B
A
LOUD
DIRECT
PRO-LOGIC
MUTING
MONO
STEREO
AUTO
ANTENNA
CABLE
MHz
kHz
B
A
LOUD
DIRECT
PRO-LOGIC
MUTING
MONO
STEREO
AUTO
ANTENNA
CABLE
MHz
kHz
B
A
LOUD
DIRECT
PRO-LOGIC
MUTING
MONO
STEREO
AUTO
ANTENNA
CABLE
MHz
kHz
B
A
LOUD
DIRECT
PRO-LOGIC
MUTING
MONO
STEREO
AUTO
ANTENNA
CABLE
MHz
kHz
B
A
LOUD
DIRECT
PRO-LOGIC
MHz
MUTING
MONO
STEREO
AUTO
ANTENNA
CABLE
kHz
B
A
LOUD
DIRECT
PRO-LOGIC
MUTING
MONO
STEREO
AUTO
ANTENNA
CABLE
MHz
kHz
B
A
LOUD
DIRECT
PRO-LOGIC
