Grundig 43 VLE 5523 BN, User Instructions

Page: 17 / 82

17­
ENGLISH
INITIAL­SET-UP
­---------------------------------------------------------------------------------------------------
Initial­set-up­and­tuning­­
channels
The television set is equipped with automatic
channel search, which searches for satellite
channels (DVB-S/S2), terrestrial channels (DVB-
T), cable channels (DVB-C) and analogue chan-
nels.
You start the search and the channels will be
stored into the different Program Tables. Follow-
ing, you can sort the channels in the Program
Tables.
The­various­settings
Depending on the type of antenna connected,
you can decide which channels you would like
the television to search for.
7
­DVB-S/S2
– Tunes digital channels from the
satellite, from page 18.
You have two options for this search:
– the basic installation which presets a stan-
dard selection, e.g. the satellite Astra 19.2°
East; you need only start the search;
– the professional installation, which allows
you to make all required settings and set
parameters for your receiver system.
7
­DVB-T – Tunes digital terrestrial channels, on
page 20.
7
­DVB-C – Tunes digital channels from the
cable provider, on page 20.
7
Tunes analogue television channels, in the
chapter “Special functions”, starting on
page 70.
7
Further settings for digital channels after the
initial set-up can also be found in the chapter
“Special Settings”, starting on page 61.
Note:­
7
Make the language and country selection for
all types, then continue reading the respective
chapter.
Selecting­language,­operating­
mode­and­country
1­
Switch on the television set from standby
with » 8 «, »
1…0
« or »
P+
« or »
P-
«.
– During initial set-up, the »Installation
Guide« will be displayed.
Help:­
7
If this menu is not displayed, restore the
television set to its default settings (see
page 54).
2­
Select the menu language with »
<
«, »
>
«,
»
V
« or »
Λ
« and press »
OK
« to confirm.
3­ Select the mode with »
<
« or »
>
« and press
» OK « to confirm.
– The settings used in »Home Mode« help
to save energy.
– Alternatively, the menu item »Shop Mode«
can be selected which the retailer can use
for demonstrating the device functions.
Note:
7
End the »Shop Mode« by restoring the
television set to its default settings (see
page 54).
4­
Select the country in which the television
set is operated with »
<
«, »
>
«, »
V
« or »
Λ
«
and press »
OK
« to confirm.
– The »Source Setup« menu appears with
the »Connection Type« line marked.
Note:
7
You can find a description of how to tune
the channels of your choice – depending
on the antenna connected – in the follow-
ing chapters.