background image

Grundfos Pumps Corporation
17100 W.118th Terrace
Olathe, Kansas 66061
Telephone: (913) 227-3400
Fax: (913) 227-3500

Grundfos Canada, Inc.
2941 Brighton Rd.
Oakville, Ontario L6H 6C9
Telephone: (905) 829-9533
Fax: (905) 829-9512

www.grundfos.com

Bombas Grundfos de Mexico, S.A. 
de C.V.
Boulevard TLC #15, Parque Industrial 
Stiva Aeropuerto
C.P. 66600 Apodaca, N.L. Mexico
Telephone: 52-81-8144-4000
Fax: 52-81-8144-4010

Products manufactured by GRUNDFOS PUMPS CORPORATION 
(GRUNDFOS) are warranted to the original user only to be free of de-
fects in material and workmanship for a period of 24 months from date 
of installation, but not more than 30 months from date of manufacture.  
GRUNDFOS’ liability under this warranty shall be limited to repairing or 
replacing at GRUNDFOS’ option, without charge, F.O.B. GRUNDFOS’ 
factory or authorized service station, any product of GRUNDFOS manu-
facture.  GRUNDFOS will not be liable for any costs of removal, installa-
tion, transportation, or any other charges which may arise in connection 
with a warranty claim.  Products which are sold but not manufactured by 

GRUNDFOS are subject to the warranty provided by the manufacturer 

of said products and not by GRUNDFOS’ warranty. GRUNDFOS will not 
be liable for damage or wear to products caused by abnormal operating 
conditions, accident, abuse, misuse, unauthorized alteration or repair, 
or if the product was not installed in accordance with GRUNDFOS’ 
printed installation and operation instructions.

To obtain service under this warranty, the defective product must be 
returned to the distributor or dealer of GRUNDFOS products from which 
it was purchased together with proof of purchase and installation date, 
failure date, and supporting installation data. Unless otherwise pro-
vided, the distributor or dealer will contact the GRUNDFOS factory or 
authorized service station for instructions. Any defective product to be 
returned to the factory or service station must be sent freight prepaid; 
documentation supporting the warranty claim and/or a Return Authori-
zation must be included if so instructed.

GRUNDFOS WILL NOT BE LIABLE FOR ANY INCIDENTAL OR CON-
SEQUENTIAL DAMAGES, LOSSES, OR EXPENSES ARISING FROM 
INSTALLATION, USE, OR ANY OTHER CAUSES. THERE ARE NO 
EXPRESS OR IMPLIED WARRANTIES, INCLUDING MERCHANT-
ABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH EX-
TEND BEYOND THOSE WARRANTIES DESCRIBED OR REFERRED 
TO ABOVE.

Some jurisdictions do not allow the exclusion or limitation of incidental 

or consequential damages and some jurisdictions do not allow limita

-

tions on how long implied warranties may last.  Therefore, the above 
limitations or exclusions may not apply to you.  This warranty gives you 

specific legal rights and you may also have other rights which vary from 

jurisdiction to jurisdiction. 

   L-UP-TL-018    Rev. 08.11

PRINTED IN USA

10. Limited warranty

Summary of Contents for UP15









Reviews: