English (GB)
16
4.3 Electrical connection
See also section
5. Operation
5.1 Display and control
Most functions can be controlled at the display and control
elements (see fig.
, pos. 28). During operation, the process can
be manually stopped or remotely stopped through external
contact.
The display shows the following information:
• System status
• System information
Fig. 11
Control and display with main display screen
5.2 Main menu
The main menu can be accessed without entering a password.
It contains four screens with following information:
Scroll through the screens using the [UP] and [DOWN] keys.
Press [ESC] to return to main display screen.
5.3 Service menu 1
The service menu 1 allows the operator to adjust the
electrochlorinator's running parameters.
To enter service menu 1, a password (code) is required.
5.3.1 Enter service menu 1
1. Press [ALT] in main menu screen 4.
2. Enter the password "01987" with the scroll keys.
3. Press [OK]. First screen of service menu 1 will be displayed.
– Scroll through the screens using the [UP] and [DOWN] keys.
– Press [OK] to edit a set point.
– Use the scroll keys to set new values.
– Press [ESC] to exit the edit mode.
– Once all values are set, press [ESC] to exit service menu 1
and return to main display screen in main menu.
Warning
Before making any electrical connections, switch off
the power supply and make sure that it cannot be
accidentally switched on.
All electrical connections must be carried out by a
qualified electrician in accordance with local
regulations.
All electrical connections must be carried out in
accordance with the separate wiring diagram
delivered with the system.
Note
The system reverts back to main display screen
automatically when the tank is full or when a fault
occurs.
TM
04
14
96
09
10
Key
Function
DEL
Key is not assigned
STAR
Key is not assigned
ALT
Service menu 1
Enter Service menu 1.
ESC
Escape
Escape takes you back to main display screen.
OK
Restart
Press OK to restart system after a fault has
occurred.
Sc
roll
key
s
UP
Screen selection
DOWN
LEFT
Manual stop in main display screen:
Can be used to stop the electrochlorinator.
Pressing once more will restart the
electrochlorinator.
RIGHT
Select and adjust values in service menu 1.
DEL
OK
ALT
ESC
*
SYSTEM OK
GENERATING
TANK LEVEL
xx %
1
Main display screen with system status and "
TANK
LEVEL
" in percent
2
"
AMPS
" (amperage) and "
VOLTS
" (voltage)
3
"
AIR FLOW
" and "
GENERATING TIME
" (operating hours)
4
Contact details Grundfos
