1. Check that the cable is connected properly at both ends.
2. If the problem is still not solved, replace the cable.
Use an ethernet cable, RJ45.
Related information
• 9.2.2 Cleaning the pressure tube and hose
12.12 The pumps start randomly
•
No alarm
Cause
Remedy
Automatic test run 24 hours af-
ter last operation.
No action necessary. It is a safety function that prevents the
shaft seal from seizing up.
Related information
• 9.2.2 Cleaning the pressure tube and hose
Multilift MD1, MDV | Fault finding the product|
44
