12
(
Q
J
OLV
K
8
6
9.2.2 Setpoint setting
Set the setpoint of the pump by pressing
or
when the pump has been set to proportional-
pressure control, constant-pressure control or
constant-curve duty.
The light fields, pos. 5, on the control panel indicate
the setpoint set.
MAGNA 32-60, 32-100
The light fields can indicate a maximum setpoint of
29.5 ft (9 m).
Fig. 13
Light fields MAGNA xx-100
9.2.3 Setting to max. curve duty
Description of function, see section 8.8 Max. or min.
curve duty.
To change over to the max. curve, press
continuously until "MAX" illuminates, see fig. 14. To
change back, press
continuously until the desired
setpoint is indicated.
Fig. 14
Max. curve
9.2.4 Setting to min. curve duty
Description of function, see section 8.8 Max. or min.
curve duty.
To change over to the min. curve, press
continuously until "MIN" illuminates, see fig. 15. To
change back, press
continuously until the desired
setpoint is indicated.
Fig. 15
Min. curve
9.2.5 Start/stop of pump
To stop the pump, press
continuously until
"STOP" illuminates. When the pump is stopped, the
green indicator light will be flashing.
To start the pump, press
continuously.
9.2.6 Resetting of fault indications
The fault indications are reset by briefly pressing any
button. The settings remain unchanged. If the fault
has not disappeared, the fault indication will
reappear within 4.5 minutes.
9.3 R100 remote control
The pump is designed for wireless communication
with the Grundfos R100 remote control. The R100
communicates with the pump via infrared light.
During communication, the R100 must be pointed at
the pump control panel. When the R100 is
communicating with the pump, the red indicator light
will flash rapidly.
The R100 offers additional possibilities of setting and
status displays for the pump.
TM
03 038
0 250
7
T
M
03
03
81
25
07
TM
03 03
82 250
7
1
1RWH
If the pump is to be stopped, it is
recommended to use the start/stop
input, the R100 or to switch off the
electricity supply. In this way, the
setpoint will remain unchanged
when the pump is started again.
