1.2 Notes
The symbols and notes below may appear in
Grundfos installation and operating instructions,
safety instructions and service instructions.
Observe these instructions for explosion-
proof products.
A blue or grey circle with a white graphical
symbol indicates that an action must be
taken.
A red or grey circle with a diagonal bar,
possibly with a black graphical symbol, in-
dicates that an action must not be taken or
must be stopped.
If these instructions are not observed, it
may result in malfunction or damage to the
equipment.
Tips and advice that make the work easier.
1.3 Safety information for the motor
Read the safety information specific for the
motor in the instructions for the motor
which are supplied with the pump.
2. Receiving the product
2.1 Transporting the product
WARNING
Falling objects
Death or serious personal injury
‐
Keep the product in a stable and fixed
position during transportation.
‐
Wear personal protective equipment.
2.2 Unpacking the product
WARNING
Falling objects
Death or serious personal injury
‐
Keep the product in a stable position
during unpacking.
‐
Wear personal protective equipment.
2.3 Inspecting the product
Before you install the product, do the following:
1. Check that the product is as ordered.
2. Check that no visible parts have been damaged.
If parts are damaged or missing, contact your local
Grundfos sales company.
2.4 Lifting the product
WARNING
Falling objects
Death or serious personal injury
‐
Do not use the motor eyebolts to lift the
entire pump if the pump is fitted with a
motor of another make than Grundfos
MG and MGE.
‐
Follow the lifting instructions.
‐
Use lifting equipment which is ap-
proved for the weight of the product.
‐
Persons must keep a safe distance to
the product during lifting operations.
‐
Wear personal protective equipment.
6
English (GB)
Summary of Contents for CRN 125-11
Page 2: ......