Mechanical installation
DANGER
Electric shock
Death or serious personal injury
‐
Switch off the power supply before you start any work on the product.
‐
Make sure that the power supply cannot be switched on accidentally.
CAUTION
Sharp element
Minor or moderate personal injury
‐
Wear personal protective equipment.
CAUTION
Crushing of feet
Minor or moderate personal injury
‐
Wear safety shoes when moving the product.
‐
Use lifting equipment.
CAUTION
Back injury
Minor or moderate personal injury
‐
Use lifting equipment.
Electrical connection
DANGER
Electric shock
Death or serious personal injury
‐
Switch off the power supply to the product including the power supply for the signal relays. Wait at least 5 minutes before you
make any connections in the terminal box. Make sure that the power supply cannot be switched on accidentally.
DANGER
Electric shock
Death or serious personal injury
‐
Check that the supply voltage and frequency correspond to the values stated on the nameplate.
DANGER
Electric shock
Death or serious personal injury
‐
It must be possible to lock the main switch in position 0. Type and requirements as specified in EN 60204-1 5.3.2.
WARNING
Electric shock
Death or serious personal injury
‐
Connect the product to protective earth and provide protection against indirect contact in accordance with local regulations.
DANGER
Electric shock
Death or serious personal injury
‐
If national legislation requires a Residual Current Device (RCD) or equivalent in the electrical installation, this must be type B or
better, due to the nature of the constant DC leakage current.
DANGER
Electric shock
Death or serious personal injury
‐
Make sure that the product is connected only to a properly grounded, grounding-type receptacle (protective earthing).
‐
The protective earth of the power outlet must be connected to the protective earth of the product. The plug must therefore have
the same PE connection system as the power outlet. If not, use a suitable adapter.
Connecting a fuse box to the electrical installation
DANGER
Electric shock
Death or serious personal injury
‐
Switch off the power supply to the product including the power supply for the signal relays. Wait at least 5 minutes before you
make any connections in the terminal box.
‐
Make sure that the power supply cannot be switched on accidentally.
Standard functional module, FM 200
DANGER
Electric shock
Death or serious personal injury
‐
Make sure that the wires to be connected to the connection groups below are separated from each other by reinforced insulation
in their entire lengths.
6
English (GB)
