7. Starting up the product
7.1 Before startup
•
The system must be filled with liquid and vented before starting
up the product.
•
Make sure that the required minimum inlet pressure is available
at the pump inlet.
•
When using the pump for the first time, the system must be
vented.
Related information
7.2 Starting up the pump
1.
Open the inlet and outlet valves.
TM076963
2.
Switch on the power supply.
TM076964
3.
The lights in the operating panel indicate that the power supply
has been switched on and the pump is running.
TM076965
7.3 Venting the pump
TM077002
Venting the pump
Small air pockets trapped inside the pump may cause noise when
starting up the pump. However, because the pump is self-venting
through the system, the noise ceases over a period of time.
To speed up the venting process, do as follows:
1.
Set the pump to speed III using the button on the operating
panel.
2.
Let the pump run for minimum 30 minutes. How fast the pump
is vented depends on the system size and design.
When you have vented the pump, that is when the noise has
ceased, set the pump according to the recommendations.
The pump must not run dry.
The pump is from the factory set to constant curve 3.
11
English (GB)
